Company News

EN511:2006 Protection Against Cold Environments thermal glove manufacturer

Views : 730
Update time : 2019-04-04 16:42:00

What  is EN 511? How the EN511 will be tested ?


EN 511 is a European Glove Standard , which test methods for gloves for protect against convective ,conductive cold &Water Permeability up to -50°C,
the Gloves will keep you warm you even in the chilliest conditions, like chilled room ,Cold strorage ware ,Winter outdoor Nordic or North Canada area. 

The symbol as below ,it will be printed onto glove back normally .



 a ,Resistance to convective cold, first fingure show how the glove temperature changed  transfer of cold via convection ,
preformance level 0-4 , 4 being the most cold resistant

b, Resistance to contact cold, second figure shows how well the glove protects against contact cold,preformance level 0-4 , 4 being the most cold resistant

C,Water Permeability, the test glove is submerged into water for 5 minutes, If the inner glove remain dry, then it passes with a Level 1 rating, while the gloves that fail receive a Level 0 rating. 

This is a glove test mainly for most of Cold store glove ,Freezer glove ,Cold store driver glove etc , some of our gloves had passed this test already ,
this test period is about 1month ,much longer than other test ,more expensive of course . 

As a EN511 cold resistant thermal work glove manufacturer ,we supply widely range of EN511 thermal cold resistant glove , like insulated cut resistant gloves, waterproof insulated thermal glove , insulated leather gloves ,insulated  touch screen gloves, insulated dipped gloves , Arctic gloves  etc 

The gloves are always applied in some forzen food industry ,cold warehouse picking line ,Supermarket cold store , Winter outdoor working etc 

Please feel free to contact our saleman team , we would like to recommand you a best glove which cater to your industry .

http://www.deli-wear.com/c/insulated-thermal-gloves_0010




 
Related News
Category and industry distribution of protective gloves
Category and industry distribution of protective gloves
Oct .21.2021
Hand protection is a necessary condition for safety and improving production efficiency. In order to meet the requirements of all walks of life, applications and hazardous environments, the design provides a wide range of hand protective articles with fun
Why do electronic factories wear anti-static clothes at work
Why do electronic factories wear anti-static clothes at work
Oct .14.2021
The electronic factory must wear anti-static clothes and anti-static shoes when working, and some special posts, such as circuit board repair and installation of components, also need to wear anti-static bracelets or anti-static finger covers. Wearing ant
Key points of personal safety protection in working environment of high voltage power tower
Key points of personal safety protection in working environment of high voltage power tower
Aug .25.2021
The high-voltage safety protection frame shall be fixed as soon as it is erected. The unfixed frame and potential safety hazards shall not be left when leaving the operation post to ensure the stability of the frame. When erecting and dismantling safety p
What kinds of personal protective equipment are commonly used
What kinds of personal protective equipment are commonly used
Aug .17.2021
Personal protective equipment is the necessary preventive equipment to protect the safety and health of workers in the process of labor. It uses a certain shield, belt or floating body to protect the part or whole body of workers from external invasion by